Showing posts with label schwabe. Show all posts
Showing posts with label schwabe. Show all posts

Friday, May 13, 2016

Chromophore−Protein Coupling beyond Nonpolarizable Models: Understanding Absorption in Green Fluorescent Protein

Csaba Daday, Carles Curutchet, Adalgisa Sinicropi, Benedetta Mennucci, and Claudia Filippi, 
J. Chem. Theory Comput. 2015, 11, 4825 – 4839
Contributed by Tobias Schwabe

Modeling enzymichromism, the sprectral tuning of a chromophore by its protein surroundings, is a formidable challenge for computational chemists. It involves methods from molecular dynamics simulations to excited state multi-reference computations in a QM/MM framework (or even more advanced embedding schemes).

Obviously, in each step of the modeling one has to choose from several methods and different applications. As a consequence, no standard protocol how to address the problem has been agreed upon so far. Daday et al. now presented a thorough analysis of possible routes and identified key ingredients for success in enzymichromism modeling in the paper highlighted here. As a test case, they picked the green fluorescent protein (GFP) and the electronic excitation of its chromophore in the protonated (A) and deprotonated (B) form. Two main issues are covered: What is the effect of using an optimized protein structure vs. snapshots from a MD run (and average) and how should the protein environment be modeled?

Let's look at the MD results first: For an average of 50 snapshots, the excitation energies are 3.36 ± 0.1 eV (A form) and 3.07 ± 0.1 eV (B form) at the CAM-B3LYP/6-31+G*/MM level of theory, but the energy spread is 0.5 eV in both cases. Nevertheless, the average is close to the value of an annealed structure (representative for an optimized crystal structure), which the authors also computed: 3.38 eV (A form), 3.11 eV (B form). It is hard to tell if this finding might be transferable to other protein systems or if this good agreement between ensemble average and optimized structure is just a lucky match. The energy spread might be a caveat.

In any case, the obtained values are blue-shifted in comparison to experiment which is not a failure of CAM-B3LYP (alone). This has been checked by recalculating the results with CASPT2/MM. Therefore, the authors also tried different embedding schemes instead of static point charges: state-specific induced dipoles, linear response methods including induced dipoles, and even frozen density embedding (Those readers who want to learn more about the methods and their differences, should refer to [1]). The bottom line: frozen density embedding is not a significant improvement over state-specific induced dipoles, but combining the latter with the effects of linear response in a polarizable embedding yields very good results in comparison. This is in accordance with our previous study of the problem for which CC2 in a polarizable embedding (PERI-CC2) has been applied.[2] There, a very good agreement between PERI-CC2 and all-QM computations has been demonstrated (for smaller cluster models, of course).

The study highlighted here emphasizes the importance of coupling induced dipoles to the transition moments of the excitation which is not done in all methods which allow for polarization in the classical region of a QM/MM approach. These findings also concern the even broader field of solvation models like PCM or COSMO. Everyone interested in environmental effects on electronic excitations (and other dynamical properties) should make oneself familiar with the differences of state-specific and linear response treated polarization effects. Often, they are not pointed out clearly in the literature which hampers a good interpretation of computed results and their assessment in comparison to experiment.


[1] A. S. P. Gomes, C. R. Jacob, Quantum-chemical embedding methods for treating local electronic excitations in complex chemical systems, Annu. Rep. Prog. Chem.,Scet. C:Phys. Chem. 2012, 108, 222–277 (http://dx.doi.org/10.1039/c2pc90007f)
[2] T. Schwabe, M. T. P. Beerepoot, M. T. P., J. M. H. Olsen, J. Kongsted, Analysis of computational models for an accurate study of electronic excitations in GFP Phys. Chem. Chem. Phys. 2015, 17, 2582–2588. (http://dx.doi.org/10.1039/C4CP04524F)

Tuesday, June 23, 2015

A Practicable Real-Space Measure and Visualization of Static Electron-Correlation Effects

Grimme, S. and Hansen, A., Angew Chem Int Edit, (2015)
Contributed by Tobias Schwabe

The question of how to deal with multireference (MR) cases in DFT has a longstanding history. Of course, the exact functional would also include multireference effects (or non-dynamical/non-local/static electron correlaton, as these effects are also called) and no special care is needed. But when it comes to today's density functional approximations (DFAs) within the Kohn-Sham framework, everything is a little bit more complicated. For example, Baerends and co-workers have shown that is the exchange part in GGA-DFAs that actually accounts for static electron correlation.[1] These studies, among others, led to the conclusion that the (erroneous) electron self-interaction in DFAs accounts for some of the MR character in a system. A good review about how these things are interconnected can be found in Ref. [2].

Instead of searching for better and better DFAs, another approach to the problem is to apply ensemble DFT which introduces the free electron energy and also the concept of entropy into DFT.[3] The key concept here is to allow for fractional occupation numbers in Kohn-Sham orbitals and to look at the system at T > 0 K. In case of systems with MR character which cannot be described with a single Slater determinant fractional occupation will result (for e.g. when computing natural occupation numbers). The interesting thing about ensemble DFT is that it allows to find these numbers directly via a variational approach without computing an MR wavefunction first.

Grimme and Hansen now turned this approach into a tool for a qualitative analysis of molecular systems. They do so by plotting what they call the fractional orbital density (FOD). That is, only those molecular orbitals with non-integer occupation numbers contribute to the density – and only at a finite temperature. This density vanishes completely at T = 0 K. So, the analysis literally shows MR hot spots. Integrating the FOD yields also an absolute scalar which allows to quantify the MR character and to compare different molecules. Due to the authors, this value correlates well with other values which attempts to provide such information.

A great advantage of the approach is that now the MR character can be located (geometrically) within the molecule. The findings presented in the application part of the paper go along well with chemical intuition. The analysis might help to visualize and to interpret MR phenomenon. The tool can provide insight when the nature of the electronic structure is not obvious – for example, when dealing with biradicals in a singlet spin state. It might also be a good starting point to identify relevant regions/orbitals which should be included when one wants to treat a system on a higher level than DFT, for example with WFT-in-DFT based on projector techniques. Last but not least, it can help to identify chemical systems to which standard DFAs should not (or only with great care) be applied.

References:

[1] a) O. V. Grittsenko, P. R. T. Schipper, and E. J. Baerends, J. Chem. Phys. (1997), 107, 5007 b) P. R. T. Schipper, O. V. Grittsenko, and E. J. Baerends, Phys. Rev. A (1998), 57, 1729 c) P. R. T. Schipper, O. V. Grittsenko, and E. J. Baerends, J. Chem. Phys. (1999), 111, 4056

[2] A. J. Cohen, P. Mori-Sánchez, and W. Yang., Chem. Rev. (2012), 112, 289

[3] R. G. Parr and W. Yang, Density-Functional Theory of Atoms and Molecules, Oxford University Press (1989)


Monday, March 9, 2015

Large-scale virtual high-throughput screening for the identification of new battery electrolyte solvents: computing infrastructure and collective properties

Tamara Husch, Nusret Duygu Yilmazer, Andrea Balducci and Martin Korth, Phys. Chem. Chem. Phys., 2015,17, 3394-3401
Contributed by Tobias Schwabe

If you are among those who (like me) follow from time to time what is going on in volunteer computing for Computational Chemistry, you might be well aware of the first projects in this field: QMC@home (see: www.qmcathome.org). It's been a little bit quiet around there lately but now it seems Martin Korth and his team are setting the stage for a new project for the QMC@home community: cleanmobility.now. The foundations for that are laid out in their recent PCCP paper.

Cleanmobility.now aims at supporting the development of better batteries for electric cars. As a first starting point, finding new electrolytes has been chosen as target – certainly a good choice as this idea is quite in vogue right now: e.g. see this JPC/C Feature Article (which, by the way, also shows the usage of the very interesting projected WFT-in-DFT embedding method to get accurate results for large complex systems)[1]. And for a more general overview, you can check some recent reviews about Computational Chemistry in this field [2,3].

Husch et al. make an interesting contribution here because they attack the problem by virtual HTS, one of the few studies where this idea is not “just” applied for drug discovery. Especially, they tackle the problem of collective properties. Their pilot studies show already some promising results. For example, they found nitriles to be potential electrolytes, which have also attracted some interest from experimental side.

References

[1] Taylor A. Barnes, Jakub W. Kaminski, Oleg Borodin, and Thomas F. Miller, III, J. Phys. Chem. C 2015, 119, 3865−3880, DOI: 10.1021/jp510882g

[2] Mahesh Datt Bhatt and Colm O’Dwyer, Phys. Chem. Chem. Phys., 2015, 17, 4799—4844, DOI: 10.1039/c4cp05552g

[3] Martin Korth, in Specialist Periodical Reports: Chemical Modeling: Applications and Theory, ed. M. Springborg and J.-O. Joswig, Royal Society of Chemistry, London, UK, 2014